Contact Us

Contact: Brad Merrick
Address:
Melton Vic
Phone: 03 9743 4351
Mobile: 0417 396 026

Online Enquiry

* Required fields

Torana Interior Parts

All the trim sets that I stock are made by one of the best Muscle car trimmers in Australia. All Nylex vinyls and calico backed like original.  You just can't compare this workmanship to cheap trim sets off some 'Auction sites'.
Don't get fooled thinking your saving money. You'll just be buying rubbish and if you saw these trim sets side by side, the difference is pain to see.  Restoration of the dash fascia's and heater  control panels. see pics below or in 'Restorations'.

LJ late 72-73 Brissy belts. Rewebbed, new plastics and re-zinc plated hardware. $1500.00 outright, completely re-plated too or $600 to rewebb yours.
New seatbelt ends. Included as part of 'Brissy' seatbelt re-webbing service. To restore back to original.
New plastic adjusters included in price of 'Brissy belt' re-webbing service.

Picture showing installed check strap pins. Just brush touch with colour to finish as original. $25pr + post.
LC GTR and XU-1 stainless steering wheel band. Also suits the same Black steering wheel on HT-HK Monaro. Fit's in 60 seconds! $95 + post.

LC GTR, XU-1, HT, HG Monaro stainless steel band to suit the black steering wheels. Simply slip onto the wheel till it locates into the channel. $95 +post. As of 1/9/17 ONLY 10 left. No more being made. 

Glove box lining-Original style patterned board. NO LONGER AVAILABLE

Hoor handle pins. Replacement pins so that you can strip your door handles to re chrome the handles and zinc the inner perts.  $48 set of 4 + post.
'Clean Air' Sticker. To my knowledge, these were fitted only to 72 Bathurst XU-1 Torana's and L34's. $30.00
LJ Shifter boot retainer-Made from tough acrylic with screws and nuts for easy removal and re-fitting. Suits all aussie 4 spd manual LJ consoles, including GTR and XU-1.  $40.00
LC Shifter boot assembly-Ready to fit, including boot etc $110.00

Door handle pins. $48 set of 4 + post.

Hand brake boots-LC or 72 LJ. Original Roebuck vinyl. $40.00

Hand brake boot-1973 LJ. Original long grain vinyl. $55.00
Parcel tray and kick panel set-Original style board. Includes mounting clips. Available seperately.  NOTE: This item is not always available, as the original board is very hard to get. $160.00 set.    Parcel tray $120.00 and kick panels $60.00 when sold seperately. 

LJ late 72-73 Brissy belts. Rewebbed, new plastics and re-zinc plated hardware. $1500.00 outright, completely re-plated too or $600 to rewebb yours.

I also have full LC-LJ XU-1 interiors, Headliners, Door Trims Available too. No pictures yet.

LJ Shifter boot assembly-Ready to fit, including boot and retainer etc Suits all Aussie 4spd LJ consoles including GTR and XU-1.  $95.00
Floor console trim-Silver trim. Perfect fit, includes clips.  $120.00
New scuff plates for 2dr LC-LJ. Price not confirmed yet.
Seatbelt re-webbing service. These buckles were re- satin plated by the customer. Chrome catches and buckle body must be in good condition, as they are not re-chromed. Webbing is original type and stitched together with proper seatbelt thread. $600 set of 5 belts, rewebbed. These are not a licenced product, but out perform original webbing in breaking strain tests. I'd be more than happy to use these with my sons. Awsome service.
New Product. Aussie 4spd Grain Patterned gearknob. Suits numerous GM vehicles with M20 and M21 gearbox, including the LJ GTR, XU-1 Mid 72 onwards, HQ GTS with console, SLR 5000, L34, A9X all with Aussie 4spd and some other GM vehicles.  $80
Patterned Aussie 4 spd gearknob. The repro is on the left and an NOS item on the right. Absolute exact copy including the mould line and 'break away' underneath. $80.00
4 speed pattern gear knob - Exact copy of original, and absolutely exceptional reproduction. $80.00 

Door check strap pins. Flare the base to install. $30 pr + post.

XU1 Torana Parts - Melbourne, Sydney, Brisbane, Perth and Adelaide
NEW LC GTR AND XU-1 DOOR TRIMS. GTR TRIM PICTURED. XU-1 TRIM HAS NO SILVER. MUST SUPPLY YOUR OWN LC METAL TRIM TOPS. SORRY FOR PIC QUALITY, WILL REPLACE WITH BETTER PIC SOON.
LJ GTR AND XU-1 DOOR TRIMS. AVAILABLE IN ROEBUCK OR LONG GRAIN VINYL. CAN MAKE IN OTHER COLOURED VINYLS TO SUIT YOUR VEHICLE. SORRY FOR PIC QUALITY. WILL REPLACE WITH BETTER PIC SOON.
4 speed pattern gear knob - Exact copy of original, and absolutely exceptional reproduction. $80.00 

Dash fascia and heater control panel restoration. Correct re stenciling of the silver, repair of cracks too if necessary. The silver originally had a slight sheen, and can prove this with a NOS item.  Prices at hourly rate. NO LONGER AVAILABLE

Re-stenciling and lettering of these LJ Heater control panels, or ignition panel on LC's. If the original lettering is there, I leave it and restore as necessary. Hourly rate, usually approx 3 hrs. NO LONGER AVAILABLE

Re-stencilling and lettering of these heater control panels. I restore as needed. Fill holes, new exact 'painted on' lettering, new black paint etc. Hourly rate. NO LONGER AVAILABLE
LJ XU-1 trim packages. Nylex vinyls and calico backed as original. Roebuck or Long grain. Concours quality. Call for price.
LC GTR AND XU-1 Trim kit. Nylex vinyls and calico backed as original. Concours quality. Call for price. Order time approx 3-4 months. LJ sets available too.

Headlining. Original Nylex Herringbone material. Suits very late 71 LC to the end of the LJ series. Calico backed, high quality item. $198